Yutong in ChinaDiag — start with ZK6122. Engine P/SPN may overlap truck Weichai cards; body/BCM modules need the system ID from the scanner.
Models
Symptoms
- engine derate;
- cluster U-codes;
- body lamp / door module faults;
- no communication on one bus segment;
Frequent codes
P0087— low common-rail pressureP0093— large fuel leak / CAN trap — FMI neededP0299— boost below targetP0335— crankshaft sensor no signalP0340— camshaft sensor — FMI neededP2563— VGT position sensorP0562— system voltage lowU0100— lost communication with engine ECUSPN 2898— without FMI — not a diagnosisSPN 729— intake heater — FMI neededP0088— high common-rail pressureP1011— HP pump metering valve faultP2263— turbo / boost performanceU0101— lost communication with TCM
Field notes
Do not treat every bus code as a truck rail fault — name the system (engine / BCU / door) in the form.
Fault code table
Yutong ZK6122 bus: partial overlap with engine P/SPN. Body modules need the system code from the scanner. Table — start for engine matches.
| Code | System | Summary |
|---|---|---|
P0087 | Fuel / Weichai | low common-rail fuel pressure |
P0088 | Fuel / Weichai | high common-rail fuel pressure |
P0093 | Fuel / CAN | large fuel leak / CAN trap — FMI needed |
P1011 | Fuel | HP pump metering valve |
P0193 | Fuel | rail pressure sensor — high signal |
P0299 | Turbo / VGT | boost below target (underboost) |
P2263 | Turbo | turbo / boost performance |
P2563 | VGT | VGT position sensor |
P0335 | CKP | crankshaft sensor — no signal |
P0340 | CMP | camshaft sensor — FMI needed |
P0401 | EGR | EGR — insufficient flow |
P0562 | 24V power | system voltage low |
P2509 | ECM power | intermittent ECM power |
U0100 | CAN | lost communication with engine ECU |
U0101 | CAN / TCM | no communication with TCM |
U0155 | CAN / cluster | lost communication with instrument cluster |
P0201 | Injectors | cylinder 1 injector circuit |
P0480 | Cooling | fan control circuit |
Full step-by-step — enter the code on the home page. If a card exists, click the code.